Loading... Please wait...
  • SunExplorer II 25D Kit with display
*Includes ground wire
  • SEDM6-25 Display with 6 readings (A0444)
  • PVCM25D-MPT Charge Controller (A0451)

SunExplorere II 25D-MPT: 25Amp Solar Charge Controller Kit with Display

$330.00

Product Description

** The PVCM25D-MPT charge controller is only compatible with the SEDM6-25 display unit (A0240) originally sold in the PVCM25D/SEDM6-25 kit. The PVCM25D-MPT controller is a drop in replacement for the two stage PVCM25D controller.**

If you’re ready to update your trailer charge controller to smart 6 stage charging, here is a drop in replacement that keeps the factory look. You can use the old display.

The 25 Amp solar charge module with Multi Point Tracking (MPT) controller (PVCM25D-MPT) is a rugged inline solar charge controller. It uses Pulse Width Modulation (PWM) to control the solar charge current. The controller delivers the maximum charging rates throughout each of the charging stages and connects between your 12VDC storage batteries. It is Ideal for RV’s, motor homes, trailers and off-grid applications such as small cabin sites.

The PVCM25D-MPT micro-processor based solar charge controller connects between the solar panels and the storage battery(s). It performs 7 basic functions:

  • It monitors the solar panel voltage to know when it has enough to start charging the battery(s) and when to stop charging due to end of day.
  • It monitors the battery voltage to know if to enter a soft charge (battery voltage below 10.5VDC or enter the bulk charge routine, when to enter the absorption and float routines
  • It adjusts the PWM charge algorithms based on varying load and solar conditions to maintain the maximum charging rates.
  • It checks the available solar charge voltage every second to make sure there is sufficient voltage available. If not, it suspends the charging routine until the solar voltage increase or it drop below 5VDC which it then enters night or end of day routine.
  • It compensates for battery temperature and adjusts the charge thresholds voltages when mounted in the battery area.
  • It accepts the battery top-off command signal from the SEDM6-25 display to enter a charge routine to top off the battery(s).
  • On power up it checks its battery type dip switch and sets to correct routine for that battery type.

The SEDM6-25 is the display unit for the PVCM25D-MPT controller, Its normal display is battery percent remaining and its associated LED. The select button allows the user to turn on its back light, advance to the next display setting, reset the solar Amp hour accumulator, force the PVCM25D-MPT into a charge routine to top-off the battery(s) when controller is in float mode, lock the display on the current setting, or activate scroll mode. The SEDM6-25 will automatically switch back to the battery percent remaining display setting after 4 minutes unless the display is lock is activated. The backlight will come on for 15 seconds any time the select button is pushed and will stay on continuously in scroll mode. The SEDM6-25 has a high quality brushed aluminum face plate.

Other Details

PVCM40Amp Charge Controller Kit with Display:

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
SKU:
A0454
Weight:
9.00 Ounces
Availability:
Products will usually ship with-in 3 business days from order. For larger quantities or expedited orders, please call. If you are shipping to a different country than the US, expect additional fees from the carriers when delivered.


 

Recent Updates

Connect with us

Newsletter


s