**The PVDM6-40 display units are only compatible with the PVCM40D charge controller (A0348). They ARE NOT interchangeable with other parts from other kits.**
The PVDM6-40/500 is a high quality brushed aluminum face plate with a 500A Load Shunt that has 6 Digital Readings. It is ideally suited for RV and trailer applications where the charge controller is mounted near the batteries and the remote display is mounted in the living area. A standard Ethernet Cat 5 Cable connects the controller and display rather than large battery cables.
The PVDM6-40’s normal display indication is battery voltage and its associated LED. The select button allows the user to turn on the displays back-light, advance to the next display setting, reset the solar and battery amp hour accumulators, lock display or current setting, or activate scroll mode. The PVDM6-40 will automatically switch back to the battery voltage display setting after 4 minutes unless the display setting lock is activated. The back-light will come on for 15 seconds any time the select button is pushed and will stay on continuously in scroll mode.
SOLD SEPERATELY: The 500 Amp load shunt (A0225) is REQUIRED for the PVDM6-40/500 Display to show the battery load Amps and battery Amp hours.
The 500 Amp shunt connects to the PVCM40D’s external load shunt input (A0348).
The PVDM6-40/100 is also available for a 100 Amp load shunt.
Below are the available bulk discount rates for each individual item when you purchase a certain amount